CLEANGROUT — Epoxy Grout Specialists, Singapore

We grout and re-grout tiled floors and walls with Mapei Kerapoxy, a two-part epoxy, and Mapei Ultracolor Plus. Cement grout is porous and darkens. Kerapoxy absorbs 0.05 g of water on its datasheet, so it does not darken or hold mould. Kerapoxy needs a joint of 3 mm or wider; Ultracolor Plus goes down to 2 mm.

Living areas

Cream marble porcelain floor with a terracotta-and-cream checkered border runner and epoxy joints. The joints are the part of a tiled floor that wears first.

Kitchens

Burl wood cabinetry, glossy vertical zellige backsplash, dark soapstone countertop. Kitchen joints take oil, turmeric and soap daily — epoxy wipes clean because nothing soaks in.

Bathrooms

Zellige walls, terracotta floor, backlit circular mirror in bronze. Kerapoxy absorbs 0.05 g of water on the datasheet, so the joints do not darken or hold mould the way cement grout does.

Grout colours

Colour is chosen from the Mapei range using physical samples held against your own tile on site, never from a photo or a screen. Same price in every colour.

The three questions to ask any grouting contractor

1. Which product exactly — brand and name, not just "epoxy"? Real epoxy is two parts mixed on site (ours: Mapei Kerapoxy). Ready-mixed grout from a tub — including Mapei Flexcolor CQ, often confused with Kerapoxy CQ — is not an epoxy. 2. How deep is the old grout removed, and will you photograph it? At least two-thirds of joint depth. 3. How long is the warranty, and is it in writing? CLEANGROUT gives 5 years on Kerapoxy and 2 years on Ultracolor Plus, in writing, any job size.

The process

Rake out old grout to depth → clean and dry the joints → apply the grout, mixed on site in your chosen colour → foot traffic after 24 hours, full use after 4 days. Receipt and batch numbers are available for inspection before any joint is filled.

Service area

Island-wide Singapore — and Johor Bahru, Malaysia also can: JB jobs are quoted in advance on WhatsApp before we cross the Causeway.

Pricing — the published tariff

Price = $10 × area (m²) + $4 × perimeter (m) + joint rate × joint length. Joint rates per metre: new tiles $5.04 floor / $6.55 wall; recent BTO-age grout $8.51 / $11.06; old hardened grout $11.34 / $14.74. That work value is lifted to the $380 minimum job if it falls short, and the $150 mobilisation is then added on top, waived once the work value reaches $900. The smallest job is therefore $530. No GST is charged — we are not GST-registered. Packages: Single Bathroom $488, Kitchen $588, Kitchen + 2 Bathrooms $1,488. Block rate: two or more units in the same block within the same fortnight — 2 units 5% off each, 3+ units 8% off each; best single discount applies. 5-year written warranty on every epoxy job.

Full price list & tariff detail · Instant calculator · WhatsApp +65 9800 4317